Combi Drill Taps

M8 x 1.25 HSS Combination Drill & Tap | TiN Coated

Product Code: DTMC080

Product Rating
Write A Review
Key Features
Drill, tap & deburr ferrous & non-ferrous metals & plastics in one operation up to 3.5mm
Quickly & easily produce clean, accurate threaded holes

Technical Specifications
Brand ALPHA
Subcategory MC HSS
Type of Measure MC
Angle (deg) 135
Diameter (mm) 8
Flute Length (mm) 35
Material HSS
OAL (mm) 60
Pitch (mm) 1.25
Shank Size (in) 1/4
Barcode 9313601007035
Category Combi Drill Taps
Longest side (mm) 152.00
Median side (mm) 46.00
Shortest side (mm) 11.00
Weight (gr) 20.00
Order Quantity 1
Drill, tap & deburr ferrous & non-ferrous metals & plastics in one operation up to 3.5mm Quickly & easily produce clean, accurate threaded holes.
  • Titanium nitride coating reduces heat and increases lubricity for extended life
  • Fully ground M2 HSS raw material for extended life
  • 135 degree split point cuts faster and reduces wandering
  • Working thickness: 3.5mm
  • Shank: 1/4" quick change
  • Suits: Cordless drills & impact drivers
  • Recommended RPM: 500 600
Instructions: Drill hole using medium pressure. Slow drill speed for tapping. Continue drilling after tapping to deburr the hole. Reverse tap slowly out of hole to avoid cross threading. Cutting fluid recommended when tapping metals.
End User Customer Reviews
There are currently no reviews for this product.

Alternate Products

Products to compare:
Comparing Products